Interior Trim

1. Equipment kinds for manufactures of building profiles for gypsum plasterboard

Automatic line of building profiles manufacturing LA 170
Processed material: cold-rolled steel with galvanized coating
Thickness of a tape: 0,4...1,0 mm
Width of a tape: 50...210 mm
Parting cut without stop of the line.
Production capacity: 1000 3 meters long details/hour
Production: building profiles
 

2. Equipment kinds for manufactures of fastening elements of profiles to gypsum plasterboard

Forming complex KSH 04
Processed material: cold-rolled steel with galvanized coating
Thickness of a tape: 0,5...2,0 mm
Width of a tape: 80...305 mm
Strip feeding with grip feeder
Work on uncontrolled and single strokes of a press (100 tn)
Production: Stamped details of a type «crab», «a straight line bracket», «the extension piece of profiles» etc.
 

3. Equipment kinds for manufactures of a corner and beacon profiles for plaster and putty works

Automatic line of cold roll forming LA 148
Processed material: cold-rolled steel with galvanized coating
Thickness of a tape: 0,3...0,6 mm
Width of a tape: 30...50 mm
Parting cut without stop of the line.
Production capacity: 20 3 meters long details/hour
Production: a corner and beacon profiles for plaster and putty works
 

4. Equipment kinds for manufacture of counter ceiling elements

Complex of the process equipment for manufacture of profiles drafts of brackets AK 037
Processed material: galvanized wire
Wire diameter: 3,0/4,0 mm
Production capacity: 70 detail/min
Length of drafts: 150...1100
Production: profiles drafts of brackets
 
Automatic line for manufacture of the profile Armstrong
Processed material: cold-rolled steel with galvanized or paint-and-lacquer coating
Thickness of a tape: 0,25...,35/0,35...0,55 mm
Width of a tape: 29/93 mm
Production capacity of 2 lines (at the 1st one the details 3,6m are made; at the 2nd one the details 0,6m и 1,2m are made):
  • L=0,6 m: 600 detail/hour
  • L=1,2 m: 600 detail/hour
  • L=3,6 m: 100 detail/hour
Parting cut with a line stop.
Production: longitudinal and cross-section profiles of the suspension system «Armstrong»
 
Forming complex
Processed material: spring steel
Thickness of a tape: 0,3...0,8 mm
Width of a tape: 15...50 mm
Press: 20 t, 40 t
Production: eurosprings, springs for counter ceilings
 

On the basis of the technical project of the Customer, we can make the equipment with characteristics necessary for the Customer.

Машиностроительный портал МашПорт.ru metaltop.ru

© «Arkada-MB» Ltd.2017г.    e-mail:okr@arkada-rus.com / phone: (4812) 65-26-99 (multichannel phone)