Roof

1. Equipment kinds for metal tile manufacture

Automatic line of metal tile/metal sheet manufacturing LA 120
Processed material: cold-rolled steel with galvanized or paint-and-lacquer coating
Thickness of a tape: 0,4...0,7 mm
Width of a tape: 900...1250 mm
Production capacity: 20 m/min (at Lmetal sheet=6m)
Production capacity: 8 m/min (at Lmetal tile=6m)
Parting cut with a line stop.
Production: metal tile, metal sheet and similar production
 

2. Equipment kinds for manufacture of accessories of roofing systems

Automatic line of cold-rolled profiling LA 38
Processed material: cold-rolled steel with galvanized or paint-and-lacquer coating
Thickness of a tape: 0,5...1,0 mm
Width of a tape: 70...500 mm
Production capacity (at Lapex=3m): 50 piece/hour
Parting cut with a line stop.
Production: apexes.
 
Automatic line of cold-rolled profiling LA 157
Processed material: cold-rolled steel with galvanized or paint-and-lacquer coating
Thickness of a tape: 0,6...1,5 mm
Width of a tape: 50...400 mm
Production capacity: 350 3 meters long details/hour
Adaptive manufacturing line to various kinds of products
Parting cut with a line stop.
Production: accessories of roofing systems
 

3. Equipment kinds for manufacture of a drain system

Automatic line for manufacture of water drain system details LA 38
Processed material: cold-rolled steel with galvanized or paint-and-lacquer coating
Thickness of a tape: 0,5...1,0 mm
Width of a tape: 70...500 mm
Production capacity (at Ldetails=3m):
  • For a water pipe and a trench: 200 piece/hour;
  • For a ridge: 50 piece/hour.
Parting cut with a line stop.
Production: water drain system details (water pipes, trenches, ridges etc.)
 
Automatic line for manufacture of the blanks of a trench fastening arm LA 124
Processed material: cold-rolled steel with galvanized or paint-and-lacquer coating
Thickness of a tape: 1,0...1,2 mm
Width of a tape: 98,5 mm
Production capacity: 240 details/hour
Production: blanks of a trench fastening arm
 
Plant of pipes raised edge and squeezing
Installation of pipes raised edge and squeezing is intended for raised edge and die of the end of pipes for possibility of joining of pipes with each other.
 
Folding installation
Processed material: forming billets from cold-rolled steel with galvanized or paint-and-lacquer coating.
Production: the products of water drain system demanding folding (a funnel, an elbow, etc.)
 
Former block
Processed material: cold-rolled steel with galvanized or paint-and-lacquer coating
Production: Stamped details of water drain system (elbow billets; funnel billets; an external angle; an internal angle; end caps etc.)
 

On the basis of the technical project of the Customer, we can make the equipment with characteristics necessary for the Customer.

Машиностроительный портал МашПорт.ru metaltop.ru

© «Arkada-MB» Ltd.2017г.    e-mail:okr@arkada-rus.com / phone: (4812) 65-26-99 (multichannel phone)