Longitudinal slitting lines for rolled metal

Longitudinal slitting lines for rolled metal Longitudinal slitting lines for rolled metal Longitudinal slitting lines for rolled metal Longitudinal slitting lines for rolled metal Longitudinal slitting lines for rolled metal Longitudinal slitting lines for rolled metal

Typical equipment > Longitudinal slitting lines for rolled metal

Arkada-MB LLC designs, manufactures and sells automated slitting lines for rolled metal into strips.

Automatic slitting lines produced by Arkada-MB represent the most advanced and technological solutions in the field of metal processing equipment in the Russian market. Longitudinal cutting of metal requires special equipment that guarantees high quality and optimality of the technological production process. This is what the metal slitting line from "Arcade-MB" will provide you. Our slitting lines are installed in dozens of factories across Russia and CIS countries.

Complete set of slitting line for rolled metal of Arkada-MB: loading device, uncoiler, edge shear, transverse shears, longitudinal shears, edge-scraper, looper, tensile device, winding machine, discharge device, electric device, hydraulic device, pneumatic device.

"Arkada-MB" LLC designs, manufactures and sells automatic slitting lines:

  • LA 60   - Slitting line for rolled metal with a thickness of 0,5…2,0мм
  • LA 82   - Slitting line for rolled metal with a thickness of 0,3…2,0мм
  • LA 109 - Slitting line for rolled metal with a thickness of 0,5…4,0 мм
  • LA 111 - Slitting line for rolled metal with a thickness of 0,3…0,6 мм
  • LA 116 - Slitting line for rolled metal with a thickness of 0,5…4,0 мм
  • LA 130 - Slitting line for rolled metal with a thickness of 0,2…2,0 мм
  • LA 151 - Slitting line for rolled metal with a thickness of 0,5…4,0 мм
  • LA 203 - Slitting line for rolled metal with a thickness of 3,0…10 мм
  • LA 204 - Slitting line for rolled metal with a thickness of 3,0…10 мм
  • LA 210 - Slitting line for rolled metal with a thickness of 2,0…12 мм
  • LA 221 - Slitting line for rolled metal with a thickness of 3,0…10 мм
  • LA 222 - Slitting line for rolled metal with a thickness of 3,0…10 мм
  • Custom slitting line for rolled material of the required thickness

The main advantages of these lines are the quality of the received strip, high precision of cutting, the ability to quickly switch to another cutting chart. Lines are highly automated and production control, as well as error diagnosis, is done by a computer. Depending on the customer's request, the cutting speed of the metal can reach 200 meters, which makes it possible to cut metal on an industrial scale. This distinguishes modern slitting lines from previous models in which most of the work was carried out by personnel.

The lines produced by the ARKADA-MB work with various metals - cold rolled steel, galvanized steel, metals with paint and polymer coating, aluminium, etc. The thickness of the processed material reaches 10.0 mm. If you need a slitting line, our equipment will be the right solution.

The performance and composition of the line depends on the wishes and needs of the customer. Having studied your requirements, Arkada-MB specialists will offer the optimal solution that will allow achieving the required price, performance and quality ratio of the product.

Distinctive qualities:

  • High quality of received strip
  • High cutting speed and precision
  • Ability to quickly switch to another cutting chart
  • Wide range of options for line bundling
  • Computer control over production
  • Automatic fault diagnosis

© «Arkada-MB» Ltd.2018г.    e-mail:okr@arkada-rus.com / phone: (4812) 65-26-99 (multichannel phone)